JDM Model Year Changes

Throughout the 4 year production run, numerous changes were made either for engine performance, emissions or aesthetics. The items below are only for the JDM models. Each year is represented by the model year from the stamped VIN. 1979-SN100 / 1980-SN110 / 1981-SN200 / 1982-SN300

1979 SN100 Standard Features:

• 1.8L CVCC Engine - Advance Stratified Charge Engine
• Electronic Ignition
• Front-Wheel Drive
• Four Wheel Independent Suspension (McPherson Struts
• Rack & Pinion Steering
• Negative Steering Roll Radius
• Power-Assisted Front Disc Brakes
• Dual Diagonal Brake Circuits
• Steel-Belted Radial Ply Blackwell Tires (175/70SR13)
• Bright Metal Wheel Trim Rings
• Power-operated Moonroof with Sunshade
• AM/FM Stereo w/ Unique Controls Mounted Beside Gauge Cluster
• Maintenance Reminder System (Gauge Cluster)
• Low Fuel Warning Light
• Digital Clock
• Cigarette Lighter
• Glove Box Light
• Two Speed Plus Intermittent Wipers
• Rear Wiper Defrosters
• Tinted Glass
• Rectangular Headlights with Snow Drains
• Trip Odometer
• Day/Night Rearview Mirror
• Coin Box w/ Lid
• Stowage Boxes in Rear Seat Side Panels
• Stowage Box in Center Console
• Fully Reclining Front Bucket Seats
• Full Carpeting
• Combination Light Switch on Steering Column
• Inside Hood Release
• Remote Trunk Lid Release & Interior Light
• Truck Stowage Boxes (X2)
• Protective Body Side Moldings
• Plastic Corrosion-Resistant Fender Liners
• Vanity Mirror (Right Sun Visor)
• Passenger Assist Handle
• Mud Flaps (Front Wheels Only)

1980 SN110 Standard Features:

• Includes all Standard Features for 1979
• Radio, speakers and antenna were not standard
• Radio no longer on side of gauge cluster, now located to lower dashboard
• Sunroof switch relocated to dashboard (no longer above rearview mirror)
• Transmission Gear Ratio Changes Transmission Specs
• New 3-Speed Fully Automatic Transmission replaced the 2-speed Hondamatic
• Manual transmission uses new style synchronization rings
• Brake booster check valve pressed into vacuum hose, not exposed
• Bypass solenoid valve relay added for the evaporative emission system, located in center dashboard
• Front side marker lights on fenders were relocated closer to the wheel wells and more visible
• New color (Longleet Gold w/ Ivory Interior), (Inverness Blue Metallic w/ Red Interior) deleted
• Tudor Red w/ Ivory Interior switched to Red Interior

1981 SN200 Standard Features:

• Includes all Standard Features for 1980
• New 17 Digit VIN system used (Vehicle Identification Number)
• CVCC-II Engine with revised intake and exhaust layout, alongside compression increase
• Standard Catalytic Converter
• Transmission gearing ratios changed for auto and manual
• Manual trans fifth gear updated design with new shift shaft added
• Updated rear taillight design (round reflector changed to square)
• Newer conventional dashboard layout including a new gauge cluster with separated speedometer and tachometer
• Revised center console
• Revised door panel, w/ included map pocket
• Revised front grill with two chrome stripes
• Revised side mirrors (smaller than 79-80 models)
• Revised seats, new moquette fabric with vinyl seat edges and head rests
• New courtesy key light under steering column
• New self-locking bolt replaces front/rear shock absorber pinch bolts and lower control arm pivot bolts (Resin pellet on threads)
• Transmission have a magnetized drain bolt
• Higher output coil that raises secondary voltage from 16_3KV to 22_4KV
• Crank pully bolt torque raises from 16lb-ft to 82lb-ft
• Coolant drain bolt in front of block added for 1981
• Baffled exhaust manifold is replaced with solid cast iron manifold
• Combustion chambers redesigned to help maintain a uniform 8:8:1 compression ration with increased dish on pistons
• Standard NGK spark plugs upgraded to a step hotter than previous year (B6EB-L11)
• Oil filler cap diameter increased and spring tension increased for easier removal on valve cover
• Power Steering optional with automatic transmissions only
• Fuse locations changed

1982 SN300 Standard Features:

• Includes all Standard Features for 1981
• CVCC-II engine update with a revised intake and exhaust layout to help isolate the exhaust valves and heat distribution
• New 9.3:1 Cylinder compression (1982 Honda Model Intro Book, may not be true)
• Combustion chamber improvement with a 1.4mm lowered roof (increased compression) and intake/exhaust valve angles slightly changed (1982 Honda Model Intro, Book, may not be true)
• Piston crowns modified to coincide with change in combustion shape. Deeper dished than 1981 models
• EGR now picks up exhaust gas from Cylinder #3
• Newly added secondary fuel filter at carburetor (two fuel filters for 1982)
• Carburetors feature a new float level adjustment window
• Revised manual transmission w/ new gearing and shift linkage (similar to 2nd gen accord transmission w/ hydraulic clutch)
• Manual transmissions for 1982 do not require an engine oil cooler. New single stage oil pump used.
• Automatic torque converter housings have 3 dowel pins, compared to two (1981)
• New double stage type oil pump used with automatic transmissions
• Power steering pump changed from cast iron to aluminum for better heat distribution and increase in pump pressure
• Power steering effort changed from 6lbs to 4lbs at zero speed
• Gauge cluster features extra digit for odometer
• Headlights "ON" buzzer reminder"
• Updated brake caliper and increased pad size (2nd gen civic calipers and pads)
• Revised brake dual proportioning valve
• New stabilizer bar stopper added
• Revised front grill with Honda "H" badge in center
• Newer steering wheel (similar to 2nd gen Civic)
• Revised rear seat layout including built-in center armrest w/ storage compartment
• Outer driveshaft & matching wheel-hub spline pattern changed to a larger diameter w/ different spline counts